Sunday, June 9, 2013

The Parts List.

PENDING UPDATE
Picture will be updated to show more variants and Siphon Tank parts as well as updated part details that I will update when possible. As for availability and price, these were last checked Oct of 2014.
Model 68-SPECIAL Parts List
This is the last revision of the 68-Special design. I included the original release as well. Too many parts to include conversions. The initial release was very much like the one shown in the manual. With improvements on the fly, and upgrades on older versions retaining the previous serial number, a definite tie of version to serial number is not possible. Despite all changes, if your marker has part #02 (Front Upper Receiver Casting), then you have a 68 Special regardless of what the nameplate says. Note that Milky Urethane o-rings have a 5 year shelf life and Buna o-rings have a 15 year shelf life. The 68-Special is over 20 years old. Change your o-rings...
This is a compiled parts list for the marker and the sources where they are available. I have not purchased from all these sites but their specs match the original parts. Due to lack of data, the o-ring hardness had to be guessed based on its use in the marker. I will note confirmation on ordered parts as I get them. Part #'s are not Tippmann #'s, Tippmann identified their parts by name only at the time. I randomly chose numbers and added the SP68 prefix as shown below. I also expanded and updated the owners manual tear-down drawing for the parts list. Measurements were pulled from limited documents and measuring of existing parts on my markers. Parts are identified as Stock match - should be the same as original, Equivalent replacement - some difference, usually material but should work, and Deluxe part - should out perform original part. I would also recommend Urethane o-rings over Buna but do remember that they have a 5 year shelf life, Buna have a 15 year shelf life, great for emergency spares. Listed pricing does not include shipping and was current as of 04/2013. Prices from PB sports current as of 06/08/2013. I cannot guarantee fit as Markers varied through construction and/or upgrades as well as sellers description accuracy  and specs can change. All effort has been taken shy of purchasing for accuracy. This page will be updated as information is gathered or corrected. This page is still not complete.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
*** BIG NEWS ***
Is selling used and new parts for the 68-Special.
They will not be listed below as part availability, condition, and price varies with each part. Be sure to read all descriptions as some parts have damage listed. Order placed 08/17/2013. Received. Highly recommend this source. Has some New old-stock as well.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

68SP01 - Tippmann ID: Lower Receiver Casting 
   Tippmann part : Replacement: parts salvage only.

68SP01B - Tippmann ID: Lower Receiver Casting (Early style with no milling for part 04)
   Tippmann part : Replacement: parts salvage only.

68SP02 - Tippmann ID: Front upper Receiver Casting
   Tippmann part : Replacement: parts salvage only.

68SP03 - Tippmann ID: Receiver Bolts [2 total]
   Socket Button Head Receiver retaining bolts 5/16"-24 x 3/4" [2 total]  (Note that originals have been ground shorter by 1/16" to avoid hitting front bolt.)
   Part is Available from http://www.boltdepot.com/  (read warning)
   Warning - These must be ground shorter by 1/16" to avoid hitting and damaging front bolt.
   Stock match (read warning)
   Socket button head, Alloy steel black oil finish, 5/16"-24 x 3/4" Bolt Depot Product #:13227       $0.18 ea
   Deluxe Stainless (read warning)
   Socket button head, Stainless steel 18-8, 5/16"-24 x 3/4" Bolt Depot Product # 5730                 $0.76 ea

68SP04 - Tippmann ID: Gun Valve Spacer
   Tippmann part : Actually the valve retainer plate,
   Listed as still available at PB sports. (Tippmann 68 Special Valve Spacer $4.95)  Note: I puchased one
   and it would not fit, it was too small, may be filed.
   Specs pending for home fabrication

68SP05 - Tippmann ID: End Cap Srew [1 total]
    Set screw, #10-32 x 3/16" Original appears to be plain steel or zinc plated steel.
    Part is Available from http://www.boltdepot.com/
    Equivalent Replacement
    Set screw, Allen, Cup point, Alloy steel black oil finish, #10-32 x 3/16" Product # 8486       $0.07 ea
    Deluxe Stainless
    Set screws, Allen, Cup point, Stainless steel 18-8, #10-32 x 3/16" Bolt Depot Product #: 7019  $0.10 ea
    Listed as still available at PB sports. (Tippmann 68 Special End Cap Screw $0.95)

68SP06 - Tippmann ID: Receiver Tube with Safety
   Tippmann part : Replacement: parts salvage only

68SP06 - Tippmann ID: Receiver Tube (Early style on markers with or without part 04, No Safety)
   Tippmann part : Replacement: parts salvage only

68SP07 - Tippmann ID: End Cap
   Tippmann part : I am sure this is a hydraulic part and there is a match or an equivalent, searching.
   Listed as still available at PB sports. (Tippmann 68 Special End Cap $14.95)

68SP08 - Tippmann ID: Receiver Roll Pins [3 total]
   Steel roll pins 1/8 x 3/4"
   Part is Available from http://www.fastenermart.com/
   Stock match
   PN116-0192   1/8 x 3/4"  Spring Pin, Plain Finish (no rust protection),   $3.83 pkg/100 pcs
   Deluxe Stainless
   PN166-4292   1/8 x 3/4"  Spring Pin, Stainless Steel,   $6.72   pkg/100 pcs

68SP09 -  Tippmann ID: Rear Bolt
   Tippmann part : Replacement: parts salvage only

68SP10 -  Tippmann ID: Rear Bolt O-Ring
   AS568A Dash No. -020,   7/8" x 1 x 1/16" Black Buna (Milky urethane from factory) Duro 90
   Part is Available from http://www.theoringstore.com/
   Stock Match
   020 U90 Urethane O-ring model U90020   $1.40 ea  Recommended
   020 B90 Buna-N Nitrile O-ring Model B90020   $0.15 ea

68SP11 -  Tippmann ID: Bolt Handle
   Tippmann part : Replacement: parts salvage only
   Specs pending for home fabrication

68SP12 -  Tippmann ID: Bolt Handle O-Ring
   AS568A Dash No. -011,  5/16" x 7/16" x 1/16" - Black Buna Duro 70
   Part is Available from http://www.theoringstore.com/
   Stock Match
   011 B70 Buna-N 70 O-ring Model B70011   $0.06 ea

68SP13 -  Tippmann ID: Bolt Spring
   Tippmann part : The Main spring is 4 lbs only but early models had a 2.5 lb spring. Summer and winter tensions refer to the SMG-60 line only. Read TIL report, there is
   critical data on spring safety.
   Listed as still available at PB sports. (Tippmann 68 Special Main Spring $3.95)  Note: I puchased one
   and it would not fit, not for the 68-Special, probably for the 98-custom.
   Replacements may be available soon, pending specs details to a manufacturer.

68SP14  -  Tippmann ID: Valve Body
   Tippmann part : Replacement: parts salvage only. Note original SMG models are not compatible.
   Machining required to adapt. Specs pending.

68SP14B  -  Tippmann ID: Valve Body (Early style not milled for part 04, retained with part 08)
   Tippmann part : Replacement: parts salvage only.

68SP15  -  Tippmann ID: Bolt Spring Rod
    Tippmann part : Main Spring Stabilizing Rod
    Listed as still available at PB sports. (Tippmann 68 Special Bolt Spring Rod  $5.95)  Note: I puchased 
    one and it would work for the 68-Special.

68SP16  -  Tippmann ID: Front Bolt
    Tippmann part : Moulded plastic part made only for the 68-Special
    Listed as still available at PB sports. (Tippmann 68 Special Front Bolt $9.95)

68SP17  -  Tippmann ID: Bolt Linkage Arm
   Tippmann part : Replacement: parts salvage only
   Specs pending for home fabrication

68SP18   -  Tippmann ID: Ball Latch
   Tippmann part : Replacement: parts salvage only

68SP19   -  Tippmann ID: Front Bolt O-Ring
   This one has been a challenge. Some kits had Duro90 and some Duro70. To reduce the friction damage from sand and dirt, I am changing this to the softer Duro 70.
   AS568A Dash No. -015,  9/16" x 11/16" x 1/16" Black Buna Duro 70
   Part is Available from http://www.theoringstore.com/
   Stock Match
   015 U70 Urethane O-ring Model: U70015 $1.15 ea (Factory)
   015 B70 Buna-N 70 O-ring Model B70015   $0.15 ea

68SP20   -  Tippmann ID: Ball Latch Spring
   Tippmann part : Light Spring
    Listed as still available at PB sports. (Tippmann 68 Special Ball Latch Spring $1.95)
   Replacements may be available soon, pending specs details to a manufacturer.

68SP21   -  Tippmann ID: Ball latch Roll Pin [2 total]
   Steel roll pins 3/32 x 3/4" [2 total]
   Part is Available from http://www.fastenermart.com/
   Stock Match
   PN146-9132   3/32 x 3/4"  Spring Pin, Plain Finish (no rust protection),   $3.12     pkg/100pcs
   Stainless not available in this size and length.

68SP22 - Tippmann ID: Power Tube & Bushing
   Tippmann part : Replacement: parts salvage only

68SP22B - Tippmann ID: Power Tube & Bushing (Early style with steel pin across center)
   Tippmann part : Replacement: parts salvage only

68SP23 - Tippmann ID: Power Tube Bushing O-Ring
    AS568A Dash No. -116,  3/4" x 15/16" x 3/32" - Black Buna Duro 70
    Part is Available from http://www.theoringstore.com/
    Stock Match
    116 B70 Buna-N 70 O-ring Model: B70116 $0.08 ea                                      

 
68SP24 - Tippmann ID: Velocity Adjuster Screw
   Velocity Adjustment Screw Late generation original appears to be plain zinc plated steel and early generation black oil finish, both with one 3/16" spot of red threadlock compound, 1/8" from cup (inside)
   Part is Available from http://www.boltdepot.com/
   Equivalent Replacement
   Set screws,Allen,Cup point,Alloy steel black oil finish,#10-32 x 1/2" Bolt Depot Product #: 8491 $0.08ea
   Deluxe Stainless
   Set screws, Allen, Cup point, Stainless steel 18-8, #10-32 x 1/2" Bolt Depot Product #: 7023   $0.09 ea

68SP25 - Tippmann ID: Valve O-Ring
   AS568A Dash No. -020,  7/8" x 1" x 1/16" - Black Buna (Milky urethane from factory) Duro 90
   Part is Available from http://www.theoringstore.com/
   Stock Match
   020 B90 Buna-N Nitrile O-ring Model: B90020 $0.15 ea
   020 U90 Urethane O-ring Model: U90020 $1.40 ea Recommended

68SP26 - Tippmann ID: Valve Spring
    Appears to be a stainless heavy spring
    Listed as still available at PB sports. (Tippmann 68 Special Valve Spring $1.95)
    Replacements may be available soon, pending specs details to a manufacturer.

68SP27 - Tippmann ID: Valve Seats [2 total]
     Tippmann part : Brass
     Listed as still available at PB sports. (Tippmann 68 Special Valve Seat $9.95) or in (Tippmann 68
      Special Valve Rebuild Kit $29.95)

68SP28 - Tippmann ID: Valve Plungers [ 2 total]
    Tippmann part : Brass and Stainless
    Listed as still available at PB sports. (Tippmann 68 Special Valve Plunger $9.95) or in (Tippmann 68
    Special Valve Rebuild Kit $29.95)

68SP29 - Tippmann ID: Valve Snap Ring [2 total]
    Standard fastener : specs and alternate source pending
    Listed as still available at PB sports. In (Tippmann 68 Special Valve Rebuild Kit $29.95)

68SP30 - Tippmann ID: Valve "Seat" O-Rings [2 total]
   AS568A Dash No. -012,  3/8" x 1/2" x 1/16" - Factory Urethane Duro 70 (Though shown in TIL documents as Black Buna, I verified that later models have factory Urethane. Better for liquid CO2 contact.)
   Part is Available from http://www.theoringstore.com/
   Stock match
    012 U70 Urethane O-ring Model: U70012 $0.41 ea Recommended
    012 B70 Buna-N 70 O-ring Model: B70012 $0.06 ea

68SP31 - Tippmann ID: Valve Elbow
    Micro plumbing part :  Searching for source

68SP32 - Tippmann ID: Valve Elbow "Flathead" Furrow
    Micro plumbing part : Searching for source
    Listed as still available at PB sports. In (Tippmann 68 Special Gas Line Kit $11.95)

68SP33 - Tippmann ID: Internal Gas Line Tubing
Nylotube Nylon -12 part # 233 0216 Semi-rigid Grade: ID 0.075", OD 0.125", Wall .025", WORKING
PSI AT 70°F 1000 PSI, BURST PSI AT 70°F 3000 PSI, BEND RADIUS 0.25", Shore Hardness  D ±5 72, Cold Impact Resistance -40°F, Max. Operating Temp. 212°F
Sold as 500' spool
New Age Industries
145 James Way
Southampton, PA 18966
www.newageindustries.com
Careful when buying microline as most are actually over 1/8" outside diameter. The flexible equivalent has too low of a burst rating.
    Listed as still available at PB sports. In (Tippmann 68 Special Gas Line Kit $11.95)

68SP34 - Tippmann ID: Gas Line Inserts [2 total]
    Micro plumbing part : Searching for source
    Listed as still available at PB sports. In (Tippmann 68 Special Gas Line Kit $11.95)

68SP35 - Tippmann ID: Gas Line Spring
    Tippmann part : Light spring to reinforce and protect gas tube.
    Listed as still available at PB sports. In (Tippmann 68 Special Gas Line Kit $11.95)
    Replacements may be available soon, pending specs details to a manufacturer.

68SP36 - Tippmann ID: Gas Line "Barrel" Furrow
    Micro plumbing part : Searching for source
    Listed as still available at PB sports. In (Tippmann 68 Special Gas Line Kit $11.95)

68SP37 - Tippmann ID: Hex Nut for Gun Valve Elbow
   Micro plumbing part :

68SP38 - Tippmann ID: Rear Gas Line Fitting (silver)
    Tippmann part :
    Listed as still available at PB sports. (Tippmann 68 Special Rear Gas Line Fitting $3.95)

68SP39 - Tippmann ID: Trigger (Semi-Auto)
   Tippmann part : Replacement: parts salvage only

68SP40 - Tippmann ID: Trigger Spring
   Tippmann part : Replacement: parts salvage only
   Replacements may be available soon, pending specs details to a manufacturer.

68SP41 - Tippmann ID: Sear
   Tippmann part : Replacement: parts salvage only

68SP42 - Tippmann ID: Sear Spring
   Tippmann part : Replacement: parts salvage only
   Replacements may be available soon, pending specs details to a manufacturer.


68SP43 - Tippmann ID: Barrel Screw [1 total]
   Socket cap, Alloy steel black oil finish, 1/4"-20 x 3/4"
   Part is Available from http://www.boltdepot.com/
   Stock match
   Socket cap, Alloy steel black oil finish, 1/4"-20 x 3/4" Bolt Depot Product #:   5026   $0.11 each
   Deluxe Stainless
   Socket cap, Stainless steel 18-8, 1/4"-20 x 3/4" Bolt Depot Product #: 4883   $0.18 each
 
68SP44 - Tippmann ID: Ammo Box & Pistol Grip Screw [2 total] 1/4" x 7/8"
   Socket cap, Alloy steel black oil finish, 1/4"-20 x 7/8"
   Part is Available from http://www.boltdepot.com/
   Stock match
   Socket cap, Alloy steel black oil finish, 1/4"-20 x 7/8" Bolt Depot Product #:   8029   $0.11 each
   Deluxe Stainless
   Socket cap, Stainless steel 18-8, 1/4"-20 x 7/8" Bolt Depot Product #: 5513   $0.20 each

68SP45 - Tippmann ID: 11" Standard Barrel Stock, 16" Sniper Barrel Available
   Tippmann part : Replacement: parts salvage only, Both were aluminum with no porting or rifling. They are
   non-threaded and held by the pinch bolt. Compatible with first generation SL 68 markers.
   Pictures and specs pending.

68SP46 - Tippmann ID: Front Grip
   Tippmann part : Replacement: parts salvage only

68SP47 - Tippmann ID: Rear Hand Grip
    Lonestar Compartment Grip : Baccipaintball has new old-stock for $15.00 each

68SP48 - Tippmann ID: Cylinder pin Valve seal O-Ring
    AS568A Dash No. -015,  9/16" x 11/16" x 1/16" White Teflon (Milky urethane from factory) Duro 90
    Part is Available from http://www.theoringstore.com/
    Stock match
     015 U90 Urethane O-ring Model: U90015 $0.99 ea
     015T PTFE White Teflon O-ring Model: TEF015 $0.96 ea    (Place in hot water prior to placement
     to reduce deformation and cuts.)

68SP49 - Tippmann ID: 7 oz Siphon Tank Stock, 20 oz Siphon Tank Available and recommended
    Tippmann part : Replacement: parts salvage only (Unless damaged, the 7 oz tanks do not require
    hydro-testing. The 20 oz does require testing every 5 years. Inspect and/or repair siphon tubes at this
    time.)
Do you have a siphon tank?  Hold the tank near the valve and swing it back and forth like a bell. If you hear something swinging and clanking inside, its a siphon tank. If it sounds like something rolling around, then the weight or tube is loose and must be repaired before use. Siphon tanks should be clearly marked with the word "SIPHON TANK". Using a siphon tank on a non-siphon marker can damage or destroy the marker.
    Replacement Siphon tanks can be built. Watch for my future Blog. (Read Warning)
    Warning - Modifications to CO2 tanks Should be completed by a Certified Airsmith for Safety
    and Liability reasons. Improper valve assembly can fail or come apart creating life threatening conditions.

68SP50 - Tippmann ID: Butt Stock for 7 oz Cylinders
    Tippmann part : Replacement: parts salvage only

68SP51 - Tippmann ID: NONE
    Butt Stock Round Head Bolt 10-32 x 1/2" [2 total]
    Tank Buttstock Pinch Machine Screws,  #10-32 x 1/2"   The stock screws may be alloy steel black oil
    finished or blued steel. [2 total]
    Part is Available from http://www.boltdepot.com/
    Equivalent Replacement  (These must painted black to match.)
    Machine screws,Slotted round head, Zinc plated steel,#10-32 x 1/2" Bolt Depot Product# 1762 $0.05ea
    Deluxe
    Silicon Bronze Tank Buttstock Pinch Machine Screw, I chose these over stainless, as stainless to stainless
    contact tends to gaul. [2 total]
    Slotted round head, Silicon bronze, #10-32 x 1/2"   Bolt Depot Product #: 3439   $0.40 each

68SP52 - Tippmann ID: NONE
    Butt Stock Hex Nut 10-32 [2 total]
    Part is Available from http://www.boltdepot.com/
    Equivalent Replacement  (These must painted black to match.)
    Tank Buttstock Pinch Machine Nut, The stock nuts may be the alloy steel black oil finish or blued steel.
    These must be painted black to match. [2 total]
    Hex machine screw nuts, Zinc plated steel, #10-32 Bolt Depot Product #: 2646    $0.05 each
    Deluxe
    Silicon Bronze Tank Buttstock Pinch Machine Nut, I chose these over stainless, as stainless to stainless
    contact tends to gall. [2 total]
    Hex machine screw nuts, Silicon bronze, #10-32    Bolt Depot Product #: 3479    $0.24 each

68SP53 - Tippmann ID: Owners Manual (Not Shown on Drawing)
    Tippmann part : Printed manual (Original)
    Listed as still available at PB sports. (Tippmann 68 Special Manual $6.95)

68SP54 - Tippmann ID: O-ring Kit (Not Shown on Drawing)
    O-ring replacement kit. Purchased one from PB sports and it looks new and good. Installed the o-rings         using Tippmann certified oil and grease, worked perfectly.
    Listed as still available at PB sports. (Tippmann 68 Special Oring Kit $10.95)

68SP55 - Tippmann ID: NONE
    Sling (Not Shown on Drawing)
    Nylon Webbing : Specs pending

68SP56 - Tippmann ID: NONE
    Sling Buckles (Not Shown on Drawing)
    Generic part : Specs pending

68SP57 - Tippmann ID: Tank fill Coupling (Not Shown on Drawing)
    Plumbing part : Specs pending

68SP58 - Tippmann ID: Tank fill Coupling Seal (Not Shown on Drawing)
     Nitrile or Buna Flat Washer : Specs pending

68SP59 - Tippmann ID: NONE
    68 Special Iron-on Patch (Upper right on Drawing)
    Tippmann part : Replacement: parts salvage only

68SP60 - Tippmann ID: Tank Rupture Disc O-rings [4 Total per tank] (Not Shown on Drawing)
    AS568A Dash No. -008,  3/16" x 5/16" x 1/16" - Black Buna Duro 70
    Part is Available from http://www.theoringstore.com/
    Stock match
    008 B70 Buna-N 70 O-ring Model: B70008 $0.06 ea

Note on O-rings: O-rings hardness is affected by temperature. The colder it is, the harder the material. For example- On the rear bolt seal Duro 90 would be optimal. Shore "A" scale is used on these o-rings. For use in colder climate, softer o-rings may be in order. A temperature vs hardness scale may helpful when selecting. There may likewise be an optimal hardness for Summer and Winter or Northern and Southern states. Factory levels are good starting points but environmental conditions will be the deciding factor. The usage chart in the TIL may be compared to the hardness characteristic chart to establish optimum selection. The up side is if you buy direct you can get the BEST for a fraction of the price for the mystery ring kits others are selling. Also if a vendor changes the Duro hardness between orders, You may not be told. This makes marker firing discrepancies and leaks hard to track and remedy.
                                                                                                                                                       SML
Blogger.com user StrayBlackCatsMeow

Address http://68-special.blogspot.com/
Blog "The 68-Special from Tippmann Pneumatics Inc"

Blog Reference page number 07
Title - The Parts List.
Revised - 06/18/22